Porcine Pseudorabies GE Antibody Rapid Test

Porcine Pseudorabies GE Antibody Rapid Test

The Porcine Pseudorabies gE Antibody Rapid Test is a lateral flow immunochromatographic assay for the qualitative detection of porcine pseudorabies gE Antibody (PRV-gE Ab) in pig’s serum, or plasma specimen.
Assay Time: 5-10 minutes
Specimen: serum, or plasma specimen.

Description


Intended Use

The Porcine Pseudorabies gE Antibody Rapid Test is a lateral flow immunochromatographic assay for the qualitative detection of porcine pseudorabies gE Antibody (PRV-gE Ab) in pig’s serum, or plasma specimen.

Assay Time:  5-10 minutes

Specimen: serum, or plasma specimen.


Principle

The Porcine Pseudorabies gE Antibody Rapid Test is based on sandwich lateral flow immunochromatographic assay. The test device has a testing window for the observation of assay running and result reading. The testing window has an invisible T (test) zone and a C (control) zone before running the assay. When the treated sample was applied into the sample hole on the device, the liquid will laterally flow through the surface of the test strip and react with the pre-coated PRV-gE antigens. If there are anti-PRV-gE antibodies in the specimen, a visible T line will appears. The C line should always appear after a sample is applied, which indicates a valid result. By this means, the device can accurately indicate the presence of Porcine Pseudorabies gE antibodies in the specimen. 

Test Procedure

- Collect pig’s fresh whole blood, serum or plasma specimen for use. Immediately apply the testing once collected the specimen.

- Take out the test device from the foil pouch and place it horizontally.

- Place 2 drops (approx. 80μL) of serum or plasma specimen into an assay buffer tube. Mix well and directly use in the assay.

- Interpret the result in 5-10 minutes. Result after 10 minutes is considered as invalid.

Interpretation of Results

- Positive (+): The presence of both “C” line and zone “T” line, no matter T line is clear or vague.

- Negative (-): Only clear C line appear. No T line.

- Invalid: No colored line appears in C zone. No matter if T line appears.

Quality Control

J&G Biotech, pays much attention to product quality and design success rate. On the premise of guaranteeing high supply efficiency , all the products supplied by J&G Biotech are of high and steady quality. We are running ISO9001 and ISO13485 quality control systems to ensure the good quality of our products.

 Owing to its professional quality and high-quality services , J&G Biotech gradually establishes a good reputation in the industry . However, J&G Biotech is not satisfied with its present achievements . Adhering to the excelsior spirit ,  J&G Biotech keeps enhancing development strength , with a view to providing better products to customers.


You Might Also Like

(0/10)

clearall